Good morning,

I am trying to configure a Logo, to have it send notification emails when certain events occur.

I managed (with some difficulty) to configure the SMTP parameters of the new mailbox that I created. Now, using the test function, I can send the emails correctly.

The problem is that I can't get the triggers to start the emails from the program to work. I also tried to configure the system triggers (off/on or stop/run), but they are not sent.

Hi,

here a link to a download. This also includes a FW update for LOGO! 8.4 base modules to FW V1.84.03.

According to the description also the e-mail function was improved.

Check if FW V1.84.03 is on your device. If not, upgrade your LOGO! and try again.

Hope this helps

AutoGen_380038

Hi,

here a link to a download. This also includes a FW update for LOGO! 8.4 base modules to FW V1.84.03.

According to the description also the e-mail function was improved.

Check if FW V1.84.03 is on your device. If not, upgrade your LOGO! and try again.

Hope this helps

The missing link:
Firmware update for LOGO! 8.4 basic devices and service pack 1 for LOGO! Soft Comfort V8.4

Updated the logo firmware and "Logo Comfort" to the latest version. Now everything works perfectly. Thank you very much