There are some inputs and outputs in the uss_drive_control block that are not enough docummented.

Inputs CTRL3…8

outputs STATUS3….8

I didn't find any reference in the V20 manual !!!

Is it for other drive type ?

 

If used, you must manually configure what bits go into each of those 2 optional parameters.

I have never used them in 15 years of using SINAMICS drives. 

dm@lead

There are some inputs and outputs in the uss_drive_control block that are not enough docummented.

Inputs CTRL3…8

CTRL3

IN

Word

0

Control word 3: Value that is written to a user-defined parameter of the drive. You have to configure it in the drive (optional parameter).

outputs STATUS3….8

STATUS3

OUT

Word

0

STATUS 3 of the driveThis value includes a user-definable status word of the drive

I didn't find any reference in the V20 manual !!!

Is it for other drive type ?