Navigation
how to connect 0-10 v input to which on board terminal analog input of CPU 224 XP
Created by: banjo at: 12/1/2006 11:46 AM (5 Replies)
Rating 
Thanks 0
6 Entries
| 12/1/2006 11:46 AM | |
|
Posts: 2 Rating:
|
how to connect 0-10 v potentiometer input to which terminals of on boardanalog inputs of CPU 224 XP . |
| 12/1/2006 11:55 AM | |
Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating:
|
Hi Banjo, Here is a link to manual: http://support.automation.siemens.com/WW/view/en/1109582 See appendix A: CPU specifications and Wire diagrams. Best regards, Wizard |
| 12/1/2006 12:48 PM | |
|
Posts: 2 Rating:
|
there are 6 terminals M ,I, V, M, A+ AND B+ OUT OF THESE TERMINALS WHERE SHOULD I CONNECT 0-10V INPUT THANKS I WOULD APPRECIATE YOUR REPLY |
| 12/1/2006 1:31 PM | |
|
Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating:
|
Hi, Connect between M and A+ or B+, that are the inputs. M,I and V are the outputs. Best regards, Wizard |
| 12/28/2006 4:24 PM | |
|
Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating:
|
Hello winccipc, The CPU 224XP has just 1 analog output. It can be a voltage or current.  Best regards, Wizard |
Follow us on