Navigation
Rating 
Thanks 2
4 Entries
| 1/4/2012 7:14 AM | |
Joined: 4/22/2010 Last visit: 3/31/2025 Posts: 5697 Rating:
|
Hello, Yes, that should work. Here you can find an example with KTP600 https://www.automation.siemens.com/mcms/programmable-logic-controller/en/logic-module-logo/application-examples/Pages/Default.aspx Regards, Marcjan |
|
Problem solved? |
|
| 1/4/2012 9:56 AM | |
|
Posts: 13 Rating:
|
HI Yes that is no problem at all. Just remember to use the S7-200 driver in the HMI |
This contribution was helpful to
|
|
| 1/4/2012 12:44 PM | |
|
Posts: 12 Rating:
|
I had a project where I used a Redlion HMI screen connected to 5 logo over network. Found it really easy to used. |
This contribution was helpful to
|
|
Follow us on