suk

Dear All
I have a small project to be done ,To convert OP15 (Communicating with S5 95U PLC) to OP77B.Pls answer the following question.

1)Is it posible to taking a backup of OP15 configuration with prosave and after can be transferred to OP77B
2)If not then How can I get the op15 configuration to see the adrressed for Inputs, outputs and Alarms trigger bits .
3)And if I have to reconfigured separately OP77B in Win Flex2005 then what are the steps to be taken in to account.
thanks & best regards

suk

Dear Sir,
some how i have arranged OP15C from local seiemn.but already there are system screens .so it doe'snt show reay to transfer.When I use sytem screen to change the Mode to in Tranfer .For a second it shows "Ready To Transfer" But after wards shows internal Error Tranfer" "8".
I will protoo 6SP2 to reconfigure the panel.I dont have its Manula to see the Key combination.During power up if Press Up key and ESC key together it doe'nt delete the existing system screen from Panle.
It has one Input connector along with the power supply 24VDC.What is this for?
Can I get the Manula of op15c1?
How can I delete the Existing program (System Screens from it?
I have to configure OP15 for S595U and I have to use either SI1 or SI2 using Protool ^ SP2 ,,Is it possible.

thanks

Dear Sir,

Pls do tell me the following?While configuration for op-15c1(For s5-95U)with protool sp2 pls do help me.

1)Input tag - how we can store the value for timer "T6" KT value with base value in DW of the s5 plc from the OP.
2) Output tag- how can we read the actual running timefrom the PLC for thatparticular timer say "T6".

Pls do help

thanks
help

Dear sir

Thanks a lot I got many information through your replies .I have accomplished configuartion of op15c1 sucessfully.Once again Thanks alot.

Regards

Suk