Hi,

Is there anyone that can tell how i set Vmin, Vmax and Vnom for GDB181.1E/KN in ETS 5?

I cant see there`s a option for those settings? Just in group objets?

Dear AutoGen_8792272

Yes, they are only available as group objects.

Several parameters have been moved to group objects with series G by January 2017. Parameters are datapoints written once during programming with no easy way to read back the currently set values out of the KNX device, whereas group objects can be written and read them back during operation.

Benefits of using group objects:
- Values can be read back, e.g. for checking purposes
- Values can’t be accidentally overwritten
- Values can be changed during runtime without reprogramming the KNX device

Kind Regards

When setting Vmin and Vmax from ETS5 i only get to write a percentage value between 0-3%?

I see in the manual you must write 00 after the actual value in ETS5, but i am not allowed to write 300 for 3%.

Unfortunately this ETS problem was not solved properly. For older versions, the value has to be multiplied by 100. This can bee seen in the G..B181.1E/KN documentation.

For the current version, the value has to be divided by 100. This bug was reported to the KNX association with the request 139363. The G..B181.1E/KN documentation will be updated, as soon as the versions are known.