7/19/2018 4:59 AM | |
Joined: 11/21/2017 Last visit: 8/10/2022 Posts: 15 Rating: (0) |
Thank you for your suggestion. I attached the screenshot of the error as well as the firmware information. I hope this information can be helpful in solving my problem. Thank you again. Attachmenterror_screenshot.docx (219 Downloads) |
7/19/2018 5:59 AM | |
Posts: 1283 Rating: (105) |
click on the diagnostic status and channel diagnostics for that module and see the information displayed there. Jay |
7/19/2018 6:09 AM | |
Joined: 11/21/2017 Last visit: 8/10/2022 Posts: 15 Rating: (0) |
In diagnostic status, it says: Module exists. OK In channel diagnostics, it is empty. Best Regards JR AttachmentCMS diagnostics.docx (180 Downloads) |
7/19/2018 4:12 PM | |
Joined: 7/7/2010 Last visit: 5/17/2024 Posts: 14751 Rating: (2374)
|
This FAQ may apply:
https://support.industry.siemens.com/cs/ru/en/view/109749077 |
Last edited by: Jen_Moderator at: 7/20/2018 7:18:33 AMOptimized link. science guy |
|
2/25/2019 11:11 AM | |
Posts: 1 Rating: (0) |
Hi, did you get any fix for this, i have the same problem. Trygve |
Follow us on