Dear all:
I use PCS7 V7, I know it is not necessaryto havingthe.oll file when I using the Fuzzycontrol, But I want to use the .oll to show our fuzzycontrol products to our customer withoutconnecting toture controller,where can I get the new .oll file for Wincc V6.0 higher version.

here Ialso have another question about the FuzzyControl++ V5.0 during I using the CFC4K as my targetsystem;

software environment as below:
The operating system is windows XP+sp2
PCS7 V7.0+sp1
the process I do have been printscreen, please see the enclosed files(connect error.zip).

I do as follow:
firstly, on the 1.bmp window, click the select menu, when you select the targetsystem, you must click the OK button( as show in 2.bmp) , otherwise you can not back to the connect menu,But when you clcik the OK button, the 3.bmp window will show, then I just can close the 3.bmp windows by the , after I close the 3.bmp, I click the connect menu button in 4.bmp, when I click the conncet Menu button, the entire fuzzycontrol shut down automaticly, I also test my fuzzy fpl project and sample, the question is same.

You can see the other bmp file to konw my AS project detail configuration, I copy all Fuzzy CFC library block to my project, and create a CFC, then drag the FB30 to the CFC.
The handbook do not metion detail information about the connecting between the Fuzzycontrol and PCS7.Can anyonegive me some help to solve the above problem?

Thank you very much!

Thank you much.
the enclosed file is my fuzzy CFC4K programs, please help me check it!

Dear all:
Thank you much, I have test the S7 and CFC as systemtarget all successfully;
the question is caused by the aiti-virus software; when remove theanti-virus software; then test successfully;

[snip] ...

Thank you all agian!