Rating 
Thanks 0
6 Entries
| 7/9/2021 4:54 PM | |
|
Posts: 55 Rating:
|
Hi, Currently, I am working on pump control project (A2V-flexpro) using my 4-20mA input f but the problem is when i testing during a few hours the pumps blocked(stoped)....its like there a protection relay or may be something in my programm i check the guide of pump but there is no reason for that...is there a solution for that thanks. Attachmentprincipale.zip (651 Downloads) |
| 7/9/2021 4:57 PM | |
Joined: 12/18/2014 Last visit: 1/1/2026 Posts: 36392 Rating:
|
You want learn. You have a open topic. Why do you always make new topics? |
| 7/9/2021 5:03 PM | |
|
Joined: 12/18/2014 Last visit: 1/1/2026 Posts: 36392 Rating:
|
The program is the same as in your last topic that the moderation closed. |
| 7/9/2021 5:08 PM | |
|
Posts: 55 Rating:
|
so what can i do now.... |
| 7/12/2021 8:20 AM | |
|
Posts: 8171 Rating:
|
Closed cause question posted twice. The second thread with the subject control speed peristaltic pum flex pro serie A2V is published within the conference LOGO! - Projects. Jen_Moderator |
Follow us on