Attached program file, very grateful for your help.

I'm certainly no expert, but all your counter resets seem to be activated by V0.0.

I don't see how it is activated anywhere in your program, unless it is always triggered by an external device.

Can you tell us how you intend to reset them?

Greetings, as you mentioned well, everything is directed so that an hmi activates and deactivates the inputs and marks the problem is that the counters should reach the set point and stop counting but they feed back and continue counting there I have the error but not yet i can find it The project is about a machine that has to perform ten independent counts, that is, and in sequence a value is entered in the hmi, for example a value of 20 when it reaches that value, counter 1 is deactivated and after enabling the 2nd counter, it performs another count and so on with the ten counters.

First is it not easy to read your program, because your program have hundreds of cross references. Second is it not easy to read your entries as one line message, which has to be scrolled.

Try to simplify your program and don't cut related program parts. You also can upload a short example program with 3 counters and only a few conditions. Then anyone have a chance to help you.

Regards, Scorp

Ready, I appreciate your suggestion I will try to simplify it. Greetings.