How can i ADD and Store the total of analog value's?

In a mathematical instruction recursions are not allowd.

I will take every second an analog sample (0-100) and total it untl i have a value of 1000?

If i have analog in = 5 it counts every second 5, the next second it wil become 10 next second  if anaolog in = 15, then totoal = 25 etc.

Make a variable md2 or a Dint in a DB. If it was called Totalizor and OB32 was set to 1 seconds (in the properties of the OB) then the formula would be Totalizor = Totalizor+ IW64

I often scale the IW to a real then Totalize it. Like I have the speed output from a drive. Every 10ms I add the amount of movement that would have gone through the pinch roller. (RPM * Pi * Diameter of roller)/60000. just doing this for the time period of part passing through (Photo Eye).

Toeternietoe

How can i ADD and Store the total of analog value's?

In a mathematical instruction recursions are not allowd.

I will take every second an analog sample (0-100) and total it untl i have a value of 1000?

If i have analog in = 5 it counts every second 5, the next second it wil become 10 next second  if anaolog in = 15, then totoal = 25 etc.

Unfortunately I can't quite follow you. Do you mean it like here in the example?

greeting Ella_68

The detais for me that i need are in both of the programms the same.

I have to need to use a min/max block for realisation of my programm.

Thanks both.

Toet