Navigation
Rating 
Thanks 1
2 Entries
| 3/10/2022 4:01 PM | |
|
Posts: 55 Rating:
|
Hello experts, For the library LMCBasic of SIMOTION, is there a function same as that of SINAPOS called "Continuous setpoint acceptance"? Thank you very much!
|
| 3/11/2022 1:12 PM | |
Joined: 10/11/2006 Last visit: 1/8/2026 Posts: 6065 Rating:
|
Hello, when gettin new position you can set a new PosAbsolute command, or you canuse MotionIn command beside LMCBasic. 3.13.12 Traversing according to motion vectors (V3.2 and higher) _runVelocityBasedMotionIn() MotionIn interface with velocity reference activated • Cyclically effective system variables in the IPO include: – defaultMotionIn.x (when activated by means of a command) – defaultMotionIn.y (when activated by means of a command) – defaultMotionIn.z (when activated by means of a command) https://support.industry.siemens.com/cs/de/en/view/109801495 |
|
With best regards, |
|
This contribution was helpful to
|
|
Follow us on