Hi everyone,

Can I connect Pt1000 temperature transmitter to 6es7 134-4GB11-0AB0 siemens analogue input module without the use of temperature controller card.

Thanks.

------------------------------------------------------------------------------------------
Split from ET200S - Analog Output Module.

Hi everyone,

Can I connect Pt1000 temperature transmitter to 6es7 134-4GB11-0AB0 siemens analogue input module without the use of temperature controller card.

Thanks.

From the original post:

"Can I connect Pt1000 temperature transmitter to"

A Pt1000 is a passive RTD sensor which as CaOd points out, cannot be connected to an analog input that expects to input an analog current signal, like  0/4-20mA.  A passive PT1000 is not compatible with the analog input module.

The word 'transmitter" has a conventional meaning in the instrumentation world.  The word transmitter means an active, powered device that produces a conditioned signal, typically 4-20mA.

A Pt1000 transmitter could be a temperature transmitter with a Pt1000 input and a 4-20mA output.

A transmitter with a 4-20mA output might be compatible with the analog input module.

It depends on what the "Pt1000 temperature transmitter" really is.