Hi everyone,

For the moment I use a siemens logo 6ED1 052 - 1MD08 - 0BA0 with a standard 230V-> 24V power module. My logo needs 12/24V

1) Can I use a car battery or an other battery to power my siemens logo? 

2) Will there be a problem when it does not give 12V,  or wil the logo just shut off?

3) Is there a maximum current that can go through the logo?

kind regards,

Okay thanks,

and what happens when my battery goes lower then 10.8V?

or lower then the minimum current? 

will the logo just shut off? or will it break something?

Hi,

this is why there is a range listet in the tecnical spacification.

Below 10.8V it may work or not. If you have to be sure, then you have to guaranty that the voltage doesn't drop below 10.8V.

Hope this helps