Dear all,

            I'm facing some issues in AI 8xRTD/TC 2-wire module (WIRE BREAK)

           -But in my case there are no possible for wire break error, so i have connected the rtd sensor directly to the rtd module.

           -But the error is coming in all 8 channel of 8 rtd sensor

          -Can anybody explain whats the problem is....

Regards,

Kiruba Robert

------------------------------------------------------------------------------------------
Split from Сhanel diagnostic AI 8xU/I/RTD/TC ST (6ES7 531-7KF00-0AB0).

Check the reference RTD wiring diagram for the module.  Compare with the actual RTD wiring.  Fix the differences and smile at the results.  Then remember to update the schematics used to initially connect up the system.

Kiruba Robert

Dear all,

            I'm facing some issues in AI 8xRTD/TC 2-wire module (WIRE BREAK)

           -But in my case there are no possible for wire break error, so i have connected the rtd sensor directly to the rtd module.

           -But the error is coming in all 8 channel of 8 rtd sensor

          -Can anybody explain whats the problem is....

Regards,

Kiruba Robert