Hi all,

I have a 6ES7647-0KA01-0AA2 board connected to my iot2050 shield and actually I'm using analog input succesfully. Unfortunately I cannot control from node-red code the 5 digital inputs and the 2 digital output.

in iot2050setup page I have

and in node-red

I don't know how to read and write digital inputs and output correctly. can someone help me?

many thank in advance

Have you changed the Jumper X82 in your IOT2050?

I have the same board and it is working fine.

In the Node-Red, the configuration in the Pin is ok, and the "Mode" I have is Hiz, and Interrupt is Both

thank you for your answer

x82: I had to put bridge between 1-2 or 2-3? many thanks in advance