Hello,

I have problem with connection to Internet and gps. I can call, and sms my module, but i cannot send any emails, or try to connect with WBM by HTTPS. I have all the antennas needed to connect (GPS - ANT895-6ML, GSM - Unknown). Signal strength 28/-57dBm). No data is received or transfered.
GPS is active but module doesnt see any satelites.

I use sim card from Play, which work on my phone (2g tested). APN used "internet".

"Sending e-mail failed. Last reply from server 0. Internal error identifier: 7. Number of attempts: 1"

Please help me connect to the Internet and turn on the GPS part.

Hello,

Mobile Data and GPS are independent functions from each other, so there will be different problems.

Regarding GPS. Is the antenna outside or inside? I experienced myself there is no GPS if the antennea is inside the building.

Your Mail Error message "Last reply from server 0. Internal error identifier: 7" indicates there is no communication with the server at all. This can have seperate reasons. Please check the diagnostic buffer and WAN overview

- is the CMR connected to the mobile data or not? If mobile data isn't connected mail will fail of course and this needs to be fixed before.

- If it is connected and you get the error, check the projected SMTP address

Regarding the WBM HTTPS connection.

You need to activate the function AND have a public reachable IP of your provider. Most IP aren't accessable from the public net - you do need a special contract / APN normally for this.

Best regards

Ok, I will try to take CMR and test GPS outside.

CMR is enabled to the mobile data. 

In order to send email I have created account on onet.poczta.pl. I looked up to smtp name and port, nevertheless it did not work. 

I don't understand, why it still doesnt work.

Going to test gps.

You are using port 465 for Email.

Try Port 587 - this is normally used for SMTP.

It is working. I have changed SMTP port as you said and enabled SMTP on my mail account. Sadly I did not find this setting on gmail, only IMAP and POP.

Thanks for your help.

Now I will try to set up HTTP and then add BM to the plant.