Hello,

I currently have a project where i am logging run time, cycles & pressure. Using an IoT gateway that can read from the logo with modbus TCP.

I am getting the values back to my cloud system for run time & cycles but for some reason i am only getting a 1 or 0 when trying to read the AI1 (pressure sensor ranged 0-100)

my JSON configuration file is set to read input register 1, per what the logo manual says. Can anybody help please? 

I have attached this for you. 

I have also made the assumption that AI1 is a 16bit integer, is this correct?

Thank you SO much, i was completely stumped on this one, but you have solved my issue. Once i changed the JSON file to look at ir0 it fixed my issue.