Hello
I did a project of Siemens LOGO and Delta HMI.
To read the clock from the addresses LOGO
VB988   hours
VB989   minutes
VB990   sec
is.
But HMI Delta only reads WORLD and does not read bytes alone.
Of course, I was able to read with macro writing and data conversion, but the LOGO clock cannot be changed.
Does LOGO send Word alone?
Or is there another solution?

Thank you

The LOGO! sends whatever the remote device requests.

If the Delta HMI can only requests words and not bytes, then this is a problem of the Delta HMI and not the LOGO!

Hello    ixo65

What is  the valu ?  

In the table

For example, valu  Hour = +6