New question published by FranklinBarrios is split to a separate thread with the subject GSD file for simeas P550.

Best regards
Min_Moderator

Hi what baudrate you use on your HW Profibus connection. 19200?

My HW Config Profibus is 1.5mbps and set in Simeas p50 interface is 115000.

Hello Baliwilabry;

I have looked for the gsd file for the Sicam P50/P55 Power quality meter on various sites, Product support on this forum of course, Smart Grid  (from Siemens Energy) and powerquality.de, where they advertise the product but do not show links to the required files.

As usual in these cases, I believe you will have to contact the support group at Siemens Energy (information courtesy of our friend MikeJ, who acts as a contact point between this forum and their group): You should provide the compete part number of your unit (not all models are enabled for Modbus and Profibus-DP, over a RS 85 interface) and request the device driver with the gsd file.

energy.support@siemens.com

Hope this helps,

Daniel Chartier

Hi Everyone,

I would like to ask if where can I get the latest GSD file for SICAM P (7KG7750-0AA01-0AA0/EE)? Because when I try to load the SIMEAS P IO V03.10, the SICAM P always appear in the HW Config as a DP-NORM.

I have also tried to email energy.support@siemens.com but the email returned with an error saying, "My message couldn't be delivered, because the recipient was not found."