PCS7 V9.1 SP1

CPU : CPU416-5 H PN/DP

ET200 : IM155-6 PN ST V4.2

Cards Siwarex : WP321 (7MH4138-6AA00-0BA0) and WP351 (7MH4138-6BA00-0CU0)

Libraries : WP321 and WP351 are installed

Hello everybody,

I need to use a WP321 or WP351 Siwarex cards with a ET200SP (IM155). This ET200SP is connected to a PLC S7-400 (CPU416-5 H PN/DP).

I can compile the HW config without any problems with both cards Wp321 and WP351.

But, in CFC, I added the block WP351 (FB657) or the block WP321 (FB654). I've set up the right config settings like SubnlId, RackNo, SlotNo,... and I'm not able to compile without errors.

Errors :

En_Co is not interconnected with a data source

CPU_Diag is not interconnected with a data source

In another plant, we are using a ET200SP HA (IM155-6-PN-HA V1.2 6DL1155-6AU00-0PM0) with a CPU 410-5H and we don't have any problems with the card WP351. (Also PCS7 V9.1 SP1)

I've tried to find a compatibility list between HW but I didn't find it. I've found the compatibility tool but it's between software...

What can I do? Someone has an idea? Thanks