Hello friend, 
Can you use CP343-1 to read the status of the device directly 
through the 'register or do you have to use FC11, FC12 to 
read it? I am using Telegram 20 and it cannot directly read 
the hardware declaration register. 
Thank you,

------------------------------------------------------------------------------------------
Split from acyclic read data from G120 Via CP 343-1.

Closed cause question posted twice.

The second thread with the subject G120C with CP343-1: Can I read and write I/O addresses directly installed in the Hardware section? is published within the conference SINAMICS G.

Best regards,
Jen_Moderator
​