Please send picture of your WHOLE DRIVE 

6sn1123-1ab00-0ha1. is only power section, I need to see the control card 

AutoGen_1424046

I have a siemens module that controls the movement of a 2 axis transferrer. My problem is that i can not access the code that is controlling the axis. I think the module siemens product number is 6sn1123-1ab00-0ha1. 

Thank you in advance for the assistance.

From your this picture, i Know you have Siemens SINUMERIK 810D controlling you machine--maybe CNC machine. and you have on the left side of  810D unit one double axis drive control -I think it is SIMODRIVE 611U--you said it controlling your machine transfer

Here is your question--" My problem is that i can not access the code that is controlling the axis"

tell me what CODE you want to know --

#1--you want to know code from 611U drive? or

#2- you want to know code from 810D cnc code?

If #1-- You need read manual for SIMODRIVE 611U

AutoGen_1424046

 I don't think you need know both. and I see you are very new ! for Siemens automation, I suggest you 

learning SIMODRIVE 611U 1st. that will be easy for normally people. I attached manual ,

If you have difficulty and you MUST know the code . you can PM me, as here we are NOT training center --we only help free for people have basic ideas. 

AutoGen_1424046

Knowing the code for both would be helpful. The reason I want to view the code of this machine is the PLC cards that I attached a photogragh of  to this post, as far as i know they are connected to this drive. I need to know what happens when this inputs are changing value.