Hi Experts,

I am having problem in my machine in which CPU-3162 dp is installed and in profibus approx 26 nodes are attached.(some are ET200 and some are simovert drives station nothing any special module. )

While uploading program i am getting 2 errors

1)"(2000) Error while uploading the configuration to the programming device PG,do you want to continue.."

2)"(120) Error while uploading the configuration to the programming device PG,do you want to continue.."

(PG 13.77)

i search in forum found this error come by laptop and change another laptop but still getiing this error please help.

Hi Ahmed,

Pay attention at your configuration PG.

You're uploading a PROFIBUS network and your PG-settings are for an MPI network.

Maybe it will helps you,

Guillem

hi engr_ahmed,

From the Step7-error-list:

Step 7 Error codes

13:77

While interpreting the system data blocks (SDBs) uploaded from the module, an error was recognized in the programming device and processing halted.

Inconsistent HW configuration in module, occurs when previous loading
of SDBs into the module was incomplete or faulty.

or
Options package for configuring specific modules (e.g. CPs) is not
installed

 The list is provided in this FAQ:

What is the meaning of the error codes (xxxx:yyyy) in STEP 7?

hope this helps,

regards,

 Hello! 
I`m having the same issues with s7 300, profibus network have 2 gc120c, 1 cu310 and one s120

Anyone manage to succed?

mopS04

hi engr_ahmed,

From the Step7-error-list:

 

Step 7 Error codes

13:77

While interpreting the system data blocks (SDBs) uploaded from the module, an error was recognized in the programming device and processing halted.

Inconsistent HW configuration in module, occurs when previous loading
of SDBs into the module was incomplete or faulty.

or
Options package for configuring specific modules (e.g. CPs) is not
installed

 The list is provided in this FAQ:

What is the meaning of the error codes (xxxx:yyyy) in STEP 7?

hope this helps,

regards,