I need help, my output M0.1 and M0.5 has input
but it is not enabled, 
is there any way to fix it? 
I use Step7 Micro, PLC Siemens S7-200 CPU 214. 
Thank all!
​

this is my program

it happened in SCR S0.4, S0.5, S0.6.

SCR S0.7 operate normally 

You have probably somewhere in your program an overlapping address making M0.1 and M0.5 low again.

Check the project's cross reference, look for M0.1, M0.5, MB0 and/or MD0 and find the overlapping address.