Navigation
WinCC Function Trend Control, How to clear trend without closing display?
Created by: 7001 at: 7/14/2006 6:49 PM (19 Replies)
Rating 
Thanks 1
| 7/17/2006 5:11 PM | |
|
Posts: 1398 Rating:
|
I just tested with SP3 hotfix 2 and it works as expected. What about you ? |
| 7/17/2006 5:18 PM | |
|
Posts: 12 Rating:
|
I tried this line too, but it did not clear the trend, and I cann't see "DeleteData" changed. |
| 7/17/2006 5:36 PM | |
|
Posts: 1398 Rating:
|
As I said, DeleteData is automatically reset by WinCC so you will not see a chage - however the trend should clear. I have attached my PDL. Can you change the tags on the trend and let me know if it works for you. Attachmentclear function trend control.zip (929 Downloads) |
| 7/17/2006 6:09 PM | |
|
Posts: 12 Rating:
|
Salma, I installed hotfix2 and redid the function trend control. It works now. Thank you very much. HJ |
| 9/15/2017 8:27 AM | |
|
Posts: 4 Rating:
|
Hello i am using Comfort TP 1200 and i have same problem. How can i solve it? |
| 9/27/2017 7:08 PM | |
|
Posts: 836 Rating:
|
Hi seyfeddin, if you have a comfort panel, you are not using WinCC but WinCC Comfort/Advanced. Creating an f(x) Trend View for Comfort Panels and WinCC Runtime Advanced |
Last edited by: The Body at: 9/27/2017 7:08:54 PM |
|
| 11/20/2024 7:14 AM | |
Joined: 11/13/2024 Last visit: 3/18/2025 Posts: 6 Rating:
|
any one know how to delete trend chat in tia portal 15.1 wincc professional on runtime mode |
Follow us on