SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

Connecting to FTC with Siwatool

2/19/2025 6:24 PM	Rate (0)
RickC1953 Joined: 4/28/2023 Last visit: 7/13/2025 Posts: 2 Rating: (0)	Hi I am trying to test a Siwarex system in the office before going to site to commission it. When I try to connect to the Siwarex FTC, 7MH4 900-3AA01, with Siwatool V4.0.11.0 I get the message: "The connected module cannot be accessed by this application" Does this mean a module has been detected but it is incompatible, or does it mean no module has been detected? I am using a USB to serial cable (https://www.ebay.co.uk/itm/380233085715). The FTC is on a rail with an IM153-4 PN Profinet interface, 6ES7 153-4AA01-0XB0 (V4.0), connected to a CPU 1515-2 PN with Profinet. I can read live data at the SIWAREX_FTC_B_DB in the TIA Portal V19 PLC program. What could be the problem? Thanks Rick

Suggestion To thank Quote Answer

2/20/2025 7:24 AM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 8/26/2025 Posts: 1190 Rating: (179)	Hello RickC1953, When you get the message in Siwatool: "The connected module cannot be accessed by this application" there can be two problems: 1. The firmware inside the FTC module is too old for Siwatool V4. Try to use Siwatool V2 for a test. Maybe you can go online with Siwatool V2. Ask the Siwarex Support (= hotline.siwarex@siemens.com) for the Siwatool V2 software. 2. Maybe your USB to serial converter doesn’t work correctly with the FTC module. I recommend to you to use the USB/RS232-converter of the company Aten, model: UC-232A: https://support.industry.siemens.com/cs/ww/en/view/28391503 Best regards Siwarexi

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users RickC1953

2/20/2025 11:26 AM	Rate (0)
RickC1953 Joined: 4/28/2023 Last visit: 7/13/2025 Posts: 2 Rating: (0)	Hi Siwarexi I am now using the USB/RS232-converter Aten, model: UC-232A with a null modem cable and it is working with Siwatool V2 and V4, thanks for the advice. When opening Siwatool V4 which FTC-B device should I select, 5.3.10 or 5.3.10s. NB I have downloaded the firmware file SWFT3_V5-3-11.bin to the FTC. Best regards Rick

Suggestion To thank Quote Answer

2/20/2025 1:26 PM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 8/26/2025 Posts: 1190 Rating: (179)	Hello RickC1953, Please select 5.3.10s. Best regards Siwarexi

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users RickC1953

Share this page:

Share this page on...