Hi

How to I get the segmented mode for the bar graph to work? I have tried all different options for it, but it only shows unicolour for the entire bar. Is it the background colour or normal range colour it should control? I have tried defining differnt colours based the process value for both but it changes the entire bar graph when the value exceeds the differnt limits. 

Is there an example of how this works? My goal was to have the bar graph show green for the green up to warning colour and yellow from there to the where the process value is - if that is possible. 

Running WinCC Unified V17 upd 3 with a Runtime project. 

Kind regards

Svein Roar

I am also looking for this if anyone knows?  

I have a bar graph to read temperature and want to set an Alarm section in yellow and trip section in red, both values from PLC tags, I have added the tags to the HMI tag Upper 1 and Upper 2, but cannot find the setting to enable the segments.  

This was so simple in winCC Comfort.... 

I am now running TIA19 update 2, and still this is not a standard functionality. My work around is to create a new faceplate from scratch and then make some rectangles to which I connect some property inferface values like the color and the size to simulate the warning and alarm levels. 

Next I draw some lines for a makeshift scale and last a line that has the analog value as and input for the y position. It sort of works, but I am perfecting it still. 

Hi,

Well, you could run the script with scheduled tasks, run it once during start up of the runtime. Or you can run it on a page change.

For my project there are multiple different operating modes, with their own corresponding limits, so my red and orange areas should change on a mode change or trigger the script on any (limit)tag change.

I think the last one is the best. Than the script will only run when it is necessary...  

And now I am there! A fully scalable faceplate with alarm limit colors on the background!

See video attached as a zip.