Navigation
HMI connection to S7-1500 with FW V3.1
Created by: AutoGen_1369155 at: 6/27/2025 6:42 AM (1 Replies)
Rating 
Thanks 0
2 Entries
| 6/27/2025 6:42 AM | |
Joined: 3/6/2024 Last visit: 9/29/2025 Posts: 1 Rating:
|
Just forget this post, I can't delete it... Hi, I can't seem to find which rights i am missing. My setup works fine in v3.0 but in 3.1 min HMI can't connect to the PLC. Can anyone point out which ones i am most likely to be missing? ------------------------------------------------------------------------------------------ |
Last edited by: Moderator_Lan at: 06/27/2025 07:35:53New subject after splitting Last edited by: AutoGen_1369155 at: 06/27/2025 08:59:45 |
|
| 6/27/2025 7:49 AM | |
Joined: 7/9/2015 Last visit: 1/7/2026 Posts: 4493 Rating:
|
Hi, please check this FAQ for FW 3.1 PLCs with HMI: Configuration of an HMI connection to S7-1500/S7-1200 CPUs
|
|
|
|
Follow us on