Hi All,

I am trying to create a POST API in the Industrial Edge which receives the generic response from an external application. 

I did use proper authentication while testing and did get the authentication token.

When I am testing it through the Postman, I am getting either 404 or 503 response code.

However, when I run the same flow using pure Node red, I am getting the desired behaviour.

Could you give me a heads up in building a generic simple API in Industrial Edge Flow Creator that can be tested by Postman.

Curl for the same is attached

curl -X POST http://<node-red-host>:1880/api/temperature \  -H "Content-Type: application/json" \  -d '{"temperature": 27.3}'

[
    {
        "id": "7cfeff5f7ee7b433",
        "type": "http in",
        "z": "f48a6a085b6b67fd",
        "name": "Temperature Post",
        "url": "/api/temperature",
        "method": "post",
        "upload": false,
        "skipBodyParsing": false,
        "swaggerDoc": "",
        "x": 240,
        "y": 140,
        "wires": [
            [
                "dbf96b69a0c04da4"
            ]
        ]
    }
]

Topic closed, because the question has been posted twice. The active topic can be found here:

How to create a POST API in Industrial Edge Flow Creator

Kind regards, Moderator_Lan