Hello everyone,

I want to transfer Data logging, Audit logging, alarm logging  CSV file from HMI local storage  to Clients centralized PC.

I have TP700 comfort panel.  

All the setting which i did , I attached in Attachment.

after that setting HMI not able to find the PC folder path to save file.

what setting i am missing please suggest me.

following document  i reffered:

1. 92346478_TCP_IP_Networks_Panel_DOC_v2.0.en

2.92346478_WinCC_TIA_Archiving_ServerNAS_DOC_v2.0_en

Hi anipat,

What operating system does the PC have?

Please note that as of Windows 10, version 1709, the "SMB v1.0 protocol" has been deactivated on the PCs by default.

This measure prevents Operator Panels that use the "SMB protocol" from accessing shared folders.

If this is not the case, can you ping the HMI panel from the PC?

 Hello  itafusna

Thanks for replying.

I am using Windows 10 pro and Version is 1909.

and I activated 'SMB v1.0 protocol"

Also my HMI ping form PC.

itafusna

Hi anipat,

What operating system does the PC have?

Please note that as of Windows 10, version 1709, the "SMB v1.0 protocol" has been deactivated on the PCs by default.

This measure prevents Operator Panels that use the "SMB protocol" from accessing shared folders.

If this is not the case, can you ping the HMI panel from the PC?

I AM ALSO FACING THIS SAME ISSUE