Navigation
Rating 
Thanks 0
3 Entries
| 2/5/2010 10:05 AM | |
|
Posts: 1 Rating:
|
How i can profibus Programming with micromaster MM440? |
| 2/5/2010 10:17 AM | |
Joined: 9/28/2005 Last visit: 12/9/2025 Posts: 2957 Rating:
|
Hello, Check these examples and descriptions from Siemens: http://support.automation.siemens.com/WW/view/en/22078757 http://support.automation.siemens.com/WW/view/en/22072988 Read very carefully and you should get general idea of how to control MM via profibus. |
|
Best regards, |
|
| 2/5/2010 12:53 PM | ||||||||||||||||||||||||||||||||||||||||||||||||||||
Joined: 6/3/2009 Last visit: 11/4/2025 Posts: 101 Rating:
|
Dear amirk
and Configure in (Step 7)Hardware configuration as node(Slave). I hope this will help you. |
|||||||||||||||||||||||||||||||||||||||||||||||||||
Follow us on