SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

6RA70 alarm A036

3/10/2010 5:41 AM	Rate (0)
ciwa79 Experienced Member Joined: 1/27/2009 Last visit: 12/10/2025 Posts: 42 Rating: (1)	Hi, I have alarm message A036 (No armature can flow) in my GRA70. Please advise. I already check : 1. Fuse - OK 2. Armature voltage when drive run only 5 V Regards, Ciwa
	Last edited by: ciwa79 at: 3/10/2010 5:43 AM
Suggestion To thank Quote Answer

3/10/2010 8:02 AM	Rate (0)
Mehta Posts: 80 Rating: (7)	Hi, This alarm will flash if actual armatre current is less than 1% of drive rated armature current ,flew for 500 ms. check your motor wiring and motor healthyness. Check setpoint to drive when start command is on. parameterisation done properly? rgds Ashish
Mehta Posts: 80 Rating: (7)
Suggestion To thank Quote Answer

3/10/2010 10:42 AM	Rate (0)
ciwa79 Experienced Member Joined: 1/27/2009 Last visit: 12/10/2025 Posts: 42 Rating: (1)	Hi Metha, Setpoint to drive is OK, i checked main setpoint r000 is 5%, armature current setpoint r020 is 20%. The armature current is limited from analog input1. I will check the motor. Regards, Ciwa Mehta Hi, This alarm will flash if actual armatre current is less than 1% of drive rated armature current ,flew for 500 ms. check your motor wiring and motor healthyness. Check setpoint to drive when start command is on. parameterisation done properly? rgds Ashish

Suggestion To thank Quote Answer

3/11/2010 6:23 AM	Rate (0)
ciwa79 Experienced Member Joined: 1/27/2009 Last visit: 12/10/2025 Posts: 42 Rating: (1)	Hi Metha. I checked the motor is OK, please advise. The alarm message still appears. regards Ciwa

Suggestion To thank Quote Answer

3/11/2010 6:35 AM	Rate (0)
Ayyappan Posts: 68 Rating: (1)	HELLO, how you are check the drive? with load or with out load .with load the problem won't be come ok.
Ayyappan Posts: 68 Rating: (1)
Suggestion To thank Quote Answer

3/11/2010 7:14 AM	Rate (0)
ciwa79 Experienced Member Joined: 1/27/2009 Last visit: 12/10/2025 Posts: 42 Rating: (1)	Hi, with or without load are same, A036 still appear. Is the drive faulty? Regards Ciwa

Suggestion To thank Quote Answer

Share this page:

Share this page on...