Hi all,

I need some help regarding creation of SNMP Template file out of mib file.

I am using SICAM PAS 5.11 and I want to integrate TR800 WEB into system.
TR800 WEB unit has several interface and I want to use SNMP to retrieve analogue values to SICAM PAS. I have mib file from which I can retrieve OID address for each variable.
But, in Mib files there are types that are not supported by SICAM PAS.
for example Gauge type (Integer 0..4294967295) or INTEGER (-32768..32767).
Gauge is basically supported (as per SampleDevice.txt for SNMP there is type SnmpGauge that can be normalized with SnmpGauge2ScadaInteger) but SICAM PAS is excluding it after parsing...
This is coming outin Report:

For information 'tr800SensorsIndex' (Variable 'tr800sensorsEntry'), the combination of Protocol Information Type='SnmpGauge' and Normalization='SnmpGauge2ScadaInteger' is impermissible! ---> Information not saved!4/7/20113:18:35 PM

If someone has any type of manual related to SNMP types and Normalize type supported by SICAM PAS I would be very thankful.

Best regards

Vladan