SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

Drive trip F030

8/10/2012 8:58 AM	Rate (0)
gireesh Posts: 8 Rating: (0)	Dear sir I have use 6RA7085-6DV62 drive for unwinder motor in Tention levller line but drive trip foult F030 ,during tripping drive current -16 to 18%, drive tripping resion not found pls help
gireesh Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

8/10/2012 9:12 AM	Rate (0)
KSN Diamond Expert Joined: 8/25/2006 Last visit: 1/11/2026 Posts: 2221 Rating: (282)	Hello. What the fault value in r047.01? Look at the following FAQ: 6RA70, SIMOREG DC Master; Unwarranted F030 with fault value 2.

Suggestion To thank Quote Answer

8/10/2012 11:02 AM	Rate (0)
gireesh Posts: 8 Rating: (0)	KSN Hello. What the fault value in r047.01? Look at the following FAQ: 6RA70, SIMOREG DC Master; Unwarranted F030 with fault value 2. sir ro47.01 value is 2
gireesh Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

8/10/2012 11:09 AM	Rate (0)
KSN Diamond Expert Joined: 8/25/2006 Last visit: 1/11/2026 Posts: 2221 Rating: (282)	Look at mentioned FAQ and try to set U580 as suggested.

Suggestion To thank Quote Answer

8/10/2012 12:04 PM	Rate (0)
gireesh Posts: 8 Rating: (0)	sir U580 not open due to my drive is password protected by commissioning engg.and possword not found.
gireesh Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

8/10/2012 12:16 PM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 1/10/2026 Posts: 10247 Rating: (1183)	Hello, If this drive is still in commissioning phase discuss with engineer/s about that fault. In other case ask for password. Basically you should know it after commissioning. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

8/10/2012 12:18 PM	Rate (0)
KSN Diamond Expert Joined: 8/25/2006 Last visit: 1/11/2026 Posts: 2221 Rating: (282)	If you mean password protection in U005, U006 then ask him for password. Another way is to reset all parameters to factory setting.

Suggestion To thank Quote Answer

Share this page:

Share this page on...