Navigation
SWITCH IN DISABLE IS ACTIVATED AND POWER UNIT:OVERCURRENT ERROR
Created by: raj gdipl at: 7/29/2013 12:47 PM (3 Replies)
Rating 
Thanks 0
4 Entries
| 7/29/2013 12:47 PM | |
|
Posts: 10 Rating:
|
I AM USING G120 CU240E-2 AND CU240B-2 VFD.WHEN I GIVE RUN COMMAND IT IS SHOWING AN ERROR AND SWITCH IN DISABLE IS ACTIVATED.THE ERROR IS POWER UNIT OVER CURRENT. |
| 7/30/2013 8:37 AM | |
Joined: 5/12/2006 Last visit: 12/19/2025 Posts: 22816 Rating:
|
please can you post the exact faultnumber which occured |
| 7/30/2013 8:48 AM | |
|
Posts: 10 Rating:
|
FOR ME ALSO SAME PROBLEM IN THAT OFF1 ENABLE IS MISSING R46.0 |
| 7/30/2013 10:31 AM | |
|
Posts: 10 Rating:
|
THE PROBLEM IS WIRING MISTAKE,NOW IT IS WORKING. |
Follow us on