Dear experts,

Please help me to find a solution to set a Sinamics G120 inverter with CU230P-2PN controller in order to obtain the following functionality, (with Micromaster M440 i use P0700 and P1000 to set control signal and set point source for every CDS)

I need to use 3 CDS, CDS0 will activate terminal control with fixed set point, CDS1 will activate BOP keypad control and setpoint, CDS2 will activate Profinet control and set point from PLC.

CDS will be selected using 2 digital input, CDS 0 is active if DI1=0 and DI 2=0, CDS 1 is active if DI1=1 and DI2 =0, and CDS2 is active if DI1=0 and DI2=1

Thank you!

Regards,

Thank you for your answer.

The wizard doesn't help me. I know how to create CDS, but how to assign Hand/auto BOP functionality control using a digital imput?

kenzo103

Dear experts,

Please help me to find a solution to set a Sinamics G120 inverter with CU230P-2PN controller in order to obtain the following functionality, (with Micromaster M440 i use P0700 and P1000 to set control signal and set point source for every CDS)

I need to use 3 CDS, CDS0 will activate terminal control with fixed set point, CDS1 will activate BOP keypad control and setpoint, CDS2 will activate Profinet control and set point from PLC.

CDS will be selected using 2 digital input, CDS 0 is active if DI1=0 and DI 2=0, CDS 1 is active if DI1=1 and DI2 =0, and CDS2 is active if DI1=0 and DI2=1

Thank you!

Regards,