Hi there,

Thanks for your reply.

I have found the pages in the manual showing how to set the digital output of the CMR using sms. 

Now i am having problem on how to set the digital output of the base module with sms.

Please advise.

Thank you.

Hi there,

Anyone here can advise me if i can set the digital output of the LOGO base module sms?

If can please share the document which discusses the sms command content to do the above.

Besides, i would like to find out if i have 8 numbers of LOGO base modules networked together, can i add a CMR to this network to monitor the status of one of the LOGO base Module (in this case one of the 8 LOGO base module is a master which reads the I/O status of other LOGO's when there is a change send an sms to the user).

Please advise.
Thank you in advance.

Here is an Siemens example.

https://support.industry.siemens.com/cs/document/105074237/-monitoring-and-control-with-the-logo!-cmr-module-?dti=0&pnid=13617&lc=en-DE

Hi there,

thanks a lot for the information.

I manage to get it done.