Icafaro

OMRON Quicktronic

 Mean you OMRON? And not OSRAM?

ixo65

 

Icafaro

OMRON Quicktronic

 Mean you OMRON? And not OSRAM?

You're right, sorry. It's an OSRAM product. I've fixed the message.

I see, thanks.

Then I guess my best option would be to use KNX-enabled dimmers instead of 0..10V, such as Siemens UP 525/03 and similar from the Room automation line.

From the German-speaking part of the Forum to AM2 AQ and dimming.

Response to the request to Support Request:

(Dear Mr .......,
as already suggested, is the electronic ballast is a device that is powered by 0-10V. The AM2 AQ is only for devices with 0-10V. The TOE can possibly return by this construction a reverse voltage to the device, ensuring that it can not work properly. To my knowledge, however, there are alternative circuits which are offered by the technical support of Osram. Here the function of the TOE can be ensured by means of amplifiers or isolation circuits by simple modifications.
For further information I am gladly at your disposal.)

Maybe you should contact the OSRAM Support.