Good afternoon forum,

Ive just come back from a clients house who has automized a motor with some solar panels and an inverter.

When i logged on to logosoft comfort v8 i couldnt connect to the device, it said that the subnet was the same, after changing it various times it didnt work so i changed the ip and it connected, then after i got it to comunicate i downloaded the project and tried to do an online test but it kept on saying that the project wasnt the same as the one on the logo which is strange because i got the program from the logo. I had to take the logo away because the client had to go and he didnt need it straight away being a future instalation.

Im going to do some tests on it now but this is something i dont want to happen again obviously.

Can anyone tell me where i went wrong?

When using the display parameter values are changed (for example, setpoints or time values) and you want to watch then with the original program online, reports the software that programs are not the same.

Then you have to transferred the program from the logo to the PC, there is a diagram created.
With this new diagram you can watch online.

ixo65

When using the display parameter values are changed (for example, setpoints or time values) and you want to watch then with the original program online, reports the software that programs are not the same.

Then you have to transferred the program from the logo to the PC, there is a diagram created.
With this new diagram you can watch online.

ixo65

I once created a small program to explain and then an online test conducted by web server, so you can also see the values change over the display.
In addition I have created a small picture Video.

 I like you ixo65 you always go the extra mile 

Hello Jackcaress,

you're welcome.

Thanks for Feedback and ranking.