Maybe its just me, but I've looked at this is both IE and Chrome.

Normally, if a there was a new comment to a post, it would go to the top line.  As of now, the thread shows that there has been a new post, but it stays in its current position.  This makes it difficult to find new comments as they may be 2 or three pages back.

In other words, it looks like it is no longer sorting by latest post, but instead by latest topic.

Hello Jeff Casagrande,

you're right this occurs sometimes. We know this issue and try to repair it.
In the meantime if you don't find actual posts in the conference list you can add this conference to your Conference filter and use Topics in "My conferences".

Best regards
Min_Moderator

Jeff Casagrande

...

In other words, it looks like it is no longer sorting by latest post, but instead by latest topic.

I can confirm with IE.

It happens sometimes but rarely.

Mostly after 1-2 refreshes, the sorting is OK again.

Hello,

I forgot to answer here, I'm sorry. We have fixed this issue two weeks ago. If this problem still occur please send me a feedback.

Best regards
Min_Moderator

Hello.

Some threads are still not sorted correctly by last post when trying to see them in their conferences, e.g.:

https://support.industry.siemens.com/tf/ww/en/post/536197/#post536197

https://support.industry.siemens.com/tf/ww/en/post/537817/#post537817

https://support.industry.siemens.com/tf/ww/en/post/532521/#post532521

https://support.industry.siemens.com/tf/ww/en/post/532171/#post532171

May be there some others that I could not find.

Hello KSN,

thank you for the hint, but only threads with new posts or a status change after the described Update will be sorted correctly in the conferences. Your example topics are older than the patch, for this I can only repair the problem manually (the examples should be sorted correctly now).

Best regards
Min_Moderator

I seem to be having this sorting issue currently and has been out of order for a at least a week.

results are from:

Home -> Forum -> Product Conferences -> Industrial Software -> STEP 7 (TIA Portal)
and then searching for "plcsim"

there are newer entries further below the image as well