Hi

i have a little sample of a small program that i am trying and wounder if there are some suggestions for the following.

I1 and I2 are fault inputs from external devices.

I1 will make the beacon/sounder pulse 

I2 will be steady 

what i need to do is from a push button that is on the panel mute the strobe and sounder until the faults are cleared. when the system restarts.

Thanks 

Andrew 

hi 

i used the suggested software in my program today and its worked a treat.

i worked better than what i tried as mine was waiting for the start signal as a reset 

thanks for your help