MM440 0.55kW What are parameters to modify in order to get the frequency setpoint changing between 0-50Hz
Created by: AuToM4ToR at: 1/23/2019 2:52 PM (3 Replies)
Rating 
Thanks 0
4 Entries
| 1/23/2019 2:52 PM | |
|
Posts: 10 Rating:
|
Hello, I solved the first problem and I'm starting the drive through AIN1 but frequency is moving only between 0Hz and 10Hz. Could it be due to a bad scaling ? What are parameters to modify in order to get the frequency setpoint changing between 0-50Hz. Many thanks,
------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 1/24/2019 10:07:03 AMNew subject after splitting |
|
| 1/28/2019 3:10 PM | |
Joined: 10/17/2007 Last visit: 12/30/2025 Posts: 4568 Rating:
|
May I suggest you --Google and download this book and read and try by yourself see attached picture
|
|
If you like my comments please |
|
| 1/28/2019 6:47 PM | |
Joined: 3/27/2008 Last visit: 12/30/2025 Posts: 1235 Rating:
|
Are these switches correct for the type of analogue input you are using?
AttachmentMM440 analoge ip for manual.pdf (431 Downloads) |
|
Tractor |
|
Follow us on