Dear all

Good day

I have a problem with PLCsim v5.4 sp8 ,the simulator instaaled without errors,runs well,but in the drop list of the interface (set pg/pc interface) does not support the choice of PLCSIM (LOCAL).so i can not download the PLC program on simulator.i uninstalled it and reinstall many times but same problem exist.

any help p.?

note: FYI, i after the installation of siemens sw (PCS7 V9.0)  i have changed the computer name(old: ADMIN-PC,new:Admin-PC). so i uninstalled siemens sw (PCS7 V9.0) and reinstall it on the new computer name(Admin-PC). 

i can now observe that ADMIN-PC still exist ,i do not know what i have to do to solve that problem? 

thanks ,Hati

You actually did not get my problem.again i need to download my project on the simulator.i open the simulator,there is Droplist you can choose type of connection ,i open it, then choose PLCSIM(LOCAL). but it is not active.so i can not download my program. when try to download i get error mesage "unable to estaplish connection to the module".

thanks 

Thanks again Hati,

I already tried all interfaces:

-PLCSIM(MPI)

-PLCSIM(Profibus)

-PLCSIM(TCP/IP)

-PLCSIM(ISO)

none of them works,same error mesage"unable to connect to module"

-as i mentioned before ,i think this communication problem between project database and simulator due to the name of "NETBIOS" is diffrent from the computer name.

NETBIOS name:ADMIN-PC

computer name:Admin-PC

now i want to know how to make them the same,i know it is IT issue ,but i hope if someone here could have the solution.

thanks in advance.

Hello everybody,

No suggestion for that problem?

B.R

Mohamed elokby

Hello everybody,

No suggestion for that problem?

B.R

 Hi

What's your windows?

For example, some versions have problem with windows 10.

Is your windows local administrator or it is on a domain?