Rating 
Thanks 1
4 Entries
| 3/20/2019 3:13 PM | |
|
Posts: 83 Rating:
|
How can I change an ET200S ip without using TIA can s7 1200 configuration tool do the job or, is there any other similar software ? |
| 3/20/2019 3:20 PM | |
Joined: 7/9/2015 Last visit: 12/17/2025 Posts: 4493 Rating:
|
Hi, I think Proneta can do the job! PRONETA 2.5.0.27 Commissioning and Diagnostics Tool for PROFINETRegards, Towome |
|
|
|
This contribution was helpful to
|
|
| 4/18/2019 8:44 PM | |
Joined: 2/3/2011 Last visit: 12/12/2025 Posts: 349 Rating:
|
Hi, if you have Simatic Manager you can use Edit Ethernet Node. |
| 5/22/2019 12:10 AM | |
Joined: 5/3/2016 Last visit: 12/9/2025 Posts: 25 Rating:
|
Hello everyone! You can use "Primary Setup Tool" as well. It is available here: PST I have V4.2 and is very useful. You can modify ip address, profibus address and device names. You can reach Siemens devices of your network. Regards |
Last edited by: Jen_Moderator at: 05/22/2019 13:25:25Optimized link. |
|
Follow us on