hello everyone

I have op37 panel and there is password in some fields which i don't know , i need to make modification to these fields to modify product quality.

i have the program source in protool , how can i change the password or even remove  password in protool.

Your help will be appreciated

Uploading the program from the OP by using Prosave will give you the compiled program. It is not possible to go from this program to Protool.

Using Prosave you could download the uploaded program back into the OP. That would restore all the passwords back to the original. This can be helpful if the client knows a password that has expired through the years.

i have the main program in protool not prosave so i have the source program

if i download it again to op37 i want to remove the password

How can i do that ?

engineeeer

i have the main program in protool not prosave so i have the source program

if i download it again to op37 i want to remove the password

How can i do that ?

The only way I know is to one-by-one remove the blocks that requests passwords. I am not able to be very specific as it has been many years since I touched Protool.

The simple way would be to take the original program. Go to the security related settings and set some known passwords everywhere where passwords were configured. 

The less easy way is to delete all security users from the program configuration. Compiling the program will have it complain about all the places where passwords were used. You can then one-by-one work through those.

Be warned.. there are some functions that designers put in to force halt the operation of the OP. It is not a good idea to not have that secured.

Good luck.

 Hello,

engineeeer

i have the main program in protool not prosave so i have the source program

if i download it again to op37 i want to remove the password

How can i do that ?

 ProTool Help documentation or Online inside ProTool is your way, search there how to manage users/passwords.