ixo65

Here is a possible solution for your program request.

 Hi everybody. I need help. I looked at some of the pump apps on the forum and everyone's requests for help and I found the IXO65's help was very close to what I needed but still needed a bit of tweaking. These adjustments are based on requests for help from everyone on the forum, I've put together requests that fit what I need.

------------------------------------------------------------------------------------------
Split from Alternating 3 water pumps.

ixo65

Here is a possible solution for your program request.

I want to keep it like this and add alternating time clocks for the 3 pumps. When I1 is open, the 3 pumps will start rotating every 60 minutes. When I2 is open, two pumps will run and pump until I1 turns off. When I3 opens, three pumps will run until I1 turns off. In your opinion, is this solution feasible?

qwazee

Martin, you have an unfair expectation wanting Mr ixo65 to do your work for you. He is a volunteer and is only paid by 'thank you'. You making zero design effort is shameful.

 I bought a Siemens product and was instructed by the seller that if I need support, I can go to the forum to refer to the program where the community of members using Siemens products can support. I'm not an expert in this area, I'll note.

ixo65

Try this.

The time for changing set you in the asynchronous pulse generator (B048).

I'm running a test on the simulation program you created, it has a bit of a problem with Q1, when Q3 fails, Q1 will repeat twice before switching to Q2. I'm setting a time of 5 seconds to test.

brown_martin49

 

qwazee

Martin, you have an unfair expectation wanting Mr ixo65 to do your work for you. He is a volunteer and is only paid by 'thank you'. You making zero design effort is shameful.

 I bought a Siemens product and was instructed by the seller that if I need support, I can go to the forum to refer to the program where the community of members using Siemens products can support. I'm not an expert in this area, I'll note.

Providing a complete program that suits your custom need is not support. You not being an expert will become a problem when your paying customer is having a problem. It would be most interesting to see what support you will give him without cost.

Please consider constructively taking part in the solving of your application problem. Put down your own efforts to learn. It may reduce the frustrations on your future self.