Finally, some progress! I don’t know why, but with your files, something is happening now!
However, not all of the inputs work when I replace them with mine. Only V1.0, and V1.1 turn on and off, and no integers are being received.

Attached is my updated project with all the changes.

Thanks for your kind help! :)

Thanks for all your help, that was one weird bug... Now that you've helped me find the issue, I can finally finish the project!
Thank you so much!

Nuno_

Hi again,

I tried to update this project by sending an emergency signal to the HMI, but it didn't receive the signal. What do I need to do to receive the signal on the HMI?

In the LOGO! diagram you send the emergency signal via network output with the address V 1.2

In the TIA tag list you use for this signal I 1.2.

See you now your mistake?

Oh okay, so the V type doesn't need to be assigned to either input or output?

Thanks, and sorry for the silly question.

Nuno_

Oh okay, so the V type doesn't need to be assigned to either input or output?

Thanks, and sorry for the silly question.

You've used a digital network output and assigned it the address V1.2 of the variable memory (VM).
So you must use the same address in the HMI as well.