Hi,
I have a problem with a 56600 Murr node within a Cube 67 DP slave. When i added the 56600 node at slot 13, everything stops working and i get this error messoge (see picture). Before that everything works as it should.. 

"DP slave not ready yet for data exhange"

"Different configuration data"

"Parameters must be assigned to DP slave again"

What am I missing? 

Hello AndreMange;

I have no direct experience with Murr's Cube67 system, but Murr has excellent support documents and videos. I can suggest the video on Configuring the Cube67 for Profibus-DP with Step 7, below.

One thing I noticed in the screenshot from your Cube67 configuraton is that, contrarry to the example in the tutorial file, you have not divided your Cube67 setup with  "Branch,0", "Branch 1"... headers. That might be enough for the configuration to be rejected.

Check the video file below.

Hope this helps,

Daniel Chartier

PISCEAN 2010

Hello AndreMange, 

Does this topic has any relevance with DC converters SIMOREG product conference?

You should have post this topic in Meet & Talk conference.

 No relevance at all, and this should defenetly not be on the meet & talk conference.

dchartier

Hello AndreMange;

I have no direct experience with Murr's Cube67 system, but Murr has excellent support documents and videos. I can suggest the video on Configuring the Cube67 for Profibus-DP with Step 7, below.

One thing I noticed in the screenshot from your Cube67 configuraton is that, contrarry to the example in the tutorial file, you have not divided your Cube67 setup with  "Branch,0", "Branch 1"... headers. That might be enough for the configuration to be rejected.

Check the video file below.

Hope this helps,

Daniel Chartier

dChartier is right, you should do the config according to the Murr manual, and it should work.