Petri R.

Most obvious way is to use a PEEK (SCL only) command to look through the input address space and move it to a DB and then do from there what you ever need.

Here is an example I made for one of my applications:

FOR #i := 0 TO #Input DO

    "Peeker_Byte" := PEEK(area := 16#81,
                      dbNumber := 0,
                      byteOffset := #i + 11);
    "DataBuffer".readData[#i] := "Peeker_Byte";

END_FOR;

 

 This looks like a nice solution to the problem. Unfortunatly I'm stuck in STL and Simatic Manager. I need to copy the data of 600+ markers to a DB for a new SCADA system. I have no clue how to program this efficiently. I'm now looking at BLKMOV but this is, as far as I know, only 10 bytes at ones. 

Any ideas?

------------------------------------------------------------------------------------------
Split from Moving Data From Input Area to DB.

Closed cause question posted twice.

The second thread with the subject Copy values of 600+ markers to DB is published within the conference STEP 7 / STEP 7 Lite.